![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050076.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.31
THE IQH1S ENCLOSURE RCIF MENU SYSTEM
(See drawing on previous page)
GENERAL INFORMATION
The RCIF Menu System allows access to setting of
RCIF system parameters. All operational parameters
and selections may then be made using a system of
menus displayed in two LCD windows. Menus are
selected by push buttons and further menu
selections made by rotating a spinwheel and
pressing a push button.
The spinwheel also allows continuously variable
parameters, (where applicable) to be adjusted and
the settings seen in the LCD window.
Various specific operations may be also be achieved
by operating dedicated push buttons.
RCIF Menu Details
To access this menu level, press the Modules button
on the front panel. This will reveal a scrollable list of
modules. Press the left-hand button adjacent to the
desired module. The RCIF main menu will be
revealed.
The main or top level menu allows various
sub-menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu,
the
text
will
become
reversed
(white-on-black) indicating that the mode is active. If
the mode is not available for selection the text will
remain normal.
THE MAIN MENU
Slots...
Stats...
Logging...
System...
Control...
Main Menu
Slots
This function allows each slot to be named and
interrogated.
Slot 1...
Slot 3...
Slot 5...
Slot 2...
Slot 4...
Slot 6...
Slots
Selecting a slot will reveal the following options for
the slot:
Installed Type
Installed Unit
Name
Bound Type
Slot 1 to 6
Installed Type
Installed Type
No Unit Fitted
Preset
Installed Type
This shows the type of the module that is fitted in
the slot.
Installed Unit
Installed Unit
No Unit Fitted
Preset
Installed Unit
This shows what is fitted in the slot.