![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050082.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.37
Start Time
This shows the date and time that the unit was ]ast
restarted.
OK
Start Time
Start Time
If the gateway has never received a TimeStamp
since restart, this field is left blank.
Note that this
always shows GMT (Grenwich Mean Time).
Box Type
Box Type
1U Box
Shoe Box
This item allows the 1U enclosure to be configured
as a ShoeBox.
Note that when the ShoeBox selection is made the
templates will be different and some items will only
be usable if the 1U enclosure is controlling the
selected box type.
Control
This function displays information about the
controllers for each slot.
Slot 1...
Slot 3...
Slot 5...
Show Session
Slot 2...
Slot 4...
Slot 6...
Pkt Stats...
Control
Any of the 6 slots may be interrogated and the
following information displayed.
Allow Blind Control
Single Session Only
Controller
Last Blind User
Con Pkt Count
Con Pkt Total
Blind PKT Count
Disconnect Session
Slot 1 to 6
Allow Blind Control
If the module will be controlled by Blind Control
(RollTrack and some third party remote control
systems) then Allow Blind must be enabled.
If Blind Control is not used then Allow Blind may be
disabled, giving protection against incorrectly set-
up RollTrack sources.
Single Session Only
When selected this allows only one connected
controller to control the module at any one time.
Controller
This displays the address of the connected
controllers.
Controller
0000:2F:00
Preset
Controller
The Show Session control can be used to scroll
through the connected controllers.
Packet counts from this controller, and from all
connected controllers are displayed to the right.