![background image](http://html.mh-extra.com/html/aiphone/sbx-lse/sbx-lse_instructions_2872368001.webp)
- INSTRUCTIONS -
The SBX-LSE is an 18-Gauge stainless steel lockable enclosure designed to give the video door station
added protection during non-business hours. This enclosure is designed to be mounted with the following
model Aiphone units: JF-DV, JF-DVF, JK-DV and JK-DVF.
Stainless Steel Security Lock Box
For Video Door Station Models: JF-DV, JF-DVF, JK-DV, JK-DVF
CONTENTS:
- SBX-LSE enclosure box
- Mounting plate for JF/JK-DV door station
- “L” bracket (for securing in open position)
1. Pass door station wiring through the
center of the SBX-LSE and the large
offset hole in the included mounting
plate.
2. When mounting to a 1-gang box , the
SBX-LSE should be secured to the box
or ring using the MKW-P and included
screws.
3. Attach wires to JF/JK-DV door station.
4. When mounting directly to wall surface,
verify proper orientation and hole
alignment, secure the SBX-LSE to the
wall using the corner mounting holes on
the JF/JK-DV and included screws.
Otherwise, secure the JF/JK-DV to the
MKW-P with the provided screws.
5. Secure front chassis to door station using
included security screw.
JF/JK-DV MOUNTING INSTRUCTIONS:
NOTE:
Customer is to provide a security lock of their
choosing to lock the panel in the closed position when
the system is not in use. When in the open position, the
padlock can be secured to the “L” bracket.
Page 1
**
**MKW-P for 1-gang mount
only (sold seperately)