![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050079.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.34
Log Server
This allows the characteristics of the logging server
to be specified.
Log to...
LogServer Name
Cur. Logger
Cur. Logger Addr
Last Time addr
Time from Logger
Accept via Serial
Accept via RollNet
Log Server
Log to…
This menu allows the logging connection to be
setup.
Logging Disabled
Named LogServer
Any LogServer
Log to
Logging Disabled
If this item is selected the Logging function will be
disabled.
Named LogServer
If this item is selected Logging information will only
be sent to the server named in the name window.
Note: matching of the name is case sensitive.
Any LogServer
If this item is selected Logging information will be
sent to any Logger on the system.
It is suggested that if there is only one server on
the system, this option should be chosen
LogServer Name
The Logging Server to be used may be named by
editing the text string in the text window.
Cur. Logger
This displays the name of the current Log Server. If
the Gateway does not have a logserver this will
show “
No Active Logger
”
Cur. Logger Addr
This displays the RollCall address of the current
Log Server. If the Gateway does not have a
logserver this will show “
No Active Logger
”
Last Time Addr
This shows the address from which the last time
packet was received. This can be useful in
configuring complex networks.
Time From Logger
If this is selected the Gateway will only use time
packets from the current logserver. This can be
useful in configuring complex networks.
Accept via Serial
If this is selected, the Gateway will accept servers
packets via the serial port.
Accept via RollNet
If this is selected, the Gateway will accept server
packets via the RollNet port.