![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqh1s-1u/iqh1s-1u_installation-manual_1309050057.webp)
IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.12
Network
This function allows the front panel to be `hidden'
from the network system. In the Hide mode this
front panel will not appear in the Module List
displayed on other control panels in the system.
Network:
SHOW
Save
Network
SHOW
This front panel will appear in the Module List of
other control panels.
HIDE
This front panel will not appear in the Module List
of other control panels.
Min/Max Unit Addr
The front panel can only hold a maximum of 200
addresses. The Min and Max Unit Addr (Address)
function allows a range of addresses to be
configured for partial use of the network.
Save
(0000) 32 00
Clear
Min Unit Address
The
Min Unit Addr
selection sets the minimum
address.
Save
(0000) 32 00
Clear
Max Unit Address
The
Max Unit Addr
selection sets the maximum
address.
The overall range of addresses is from 1 to 255.
Lock Controls
To set this function enter at Supervisor level, select
the
Lock Controls
item to reveal the dialogue box.
Lock Controls:
YES/NO
Lock Controls
Select either YES or NO and save.
The function is now set.
Note that if this function is set to
Lock Controls: YES
and the unit is powered-up, the message
Front Panel Locked by Supervisor!
will appear.