Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
P/N A6V10385202_a_en_--
INSTALLATION INSTRUCTIONS
Model FHD2012-U1
Inner Door for Remote Terminal Display Module
INTRODUCTION
The model FHD2012-U1 Inner Door for Terminal Display Modules from Siemens Industry, Inc. is used
with the FHB2001-U1/R1 Backbox. The FHD2012-U1 Inner Door has an indentation and opening to allow
the FT2014 or FT2015 Remote Display Terminal to be installed in the FHB2001-U1/R1 Backbox in order
to meet the regulatory requirements for Canadian Applications. This inner door is black, and for indoor use
only in a dry and protected environment.
Figure 1: FHD2012-U1 Inner Door for the Remote Terminal Display Module
The following hardware kit is provided with FHD2012-U1:
Qty
ITEM
USE
4
Pan Philips semi-square screws
Used to mount the inner door to the enclosure
1
Ground Strap
Used to ground the inner door with the enclosure
Install the Remote Terminal Display Module on the Inner Door:
1.
Separate the front panel from the back panel, making sure not to damage the ground strap “A”.
The four screws will be reused, but disregard the back panel since it is no longer needed.
