Managing and Configuring
the Touchscreen
98
RB6741-Z Touchscreen Security System User Manual
Configuring Automatic Screen Dimming and Night Mode Dimming
You can choose to have the screen dim to a set level after a period of inactivity (this can be
used instead of a screensaver or along with a screensaver). For information about how to
configure a screensaver to appear after a period of inactivity, see
“Configuring the
Screensaver
” on page 100.
Additionally, you can choose to have the screen dim completely during configured hours,
called Night Mode (see page
99
).
During this time, the buttons on the front of the
Touchscreen darken completely.
The Touchscreen will not enter Night Mode when it is Armed.
Note:
The Night Mode brightness setting is not the same as Arm Night Mode
described on page 41.
The following procedure describes how to configure the screen to dim after a period of
inactivity: When a user touches the screen, it brightens to its default brightness level.
1. From the Settings menu (see
"
Configuring the Touchscreen
”
on page 18), tap
Touchscreen > Screen Configuration
. The Screen Configuration menu appears.
2. Tap
Automatic Screen Dimming
. A couple of controls let you set automatic dimming
level and the amount of idle time for the Touchscreen to wait before dimming.
