Managing Environmental Devices
86
RB6741-Z Touchscreen Security System User Manual
3. Tap the icon for a lighting device to modify it. The details of the selected lighting device
appear.
4. Tap the
Light Name
field to display a keyboard screen to change the label of the
Lighting device.
5. Tap the
Dimmable
field to choose (
Yes
or
No
) to use the dimming features of the
lighting device if available.
6. Tap
Next
. The Choose the Light Device You Wish to Modify screen appears again.
Adding a Lighting Device
The following procedure describes how to add a lighting device.
Note:
If you need to update the firmware on any sensor before adding it to the
security system, you must reset the sensor to factory defaults before adding it to
the OpenHome Converge system. This is essential so that it can receive the
necessary changes to communicate with the Touchscreen.
1. From the Settings app (see
"
Configuring the Touchscreen
”
on page 18), tap
Home
Devices
. The Home Devices menu appears.
2. Tap
Lighting > Add Lights
. The Locating Lighting Devices screen appears.
3. Tap
Next
.
4. Plug the lighting device into a wall socket. Secure it with a screw, if applicable. The
lighting devices should be unpaired when they are removed from their packaging. When
it is installed in the socket, the LED flashes three times every five seconds indicating that
it is in Search mode and ready to pair with a Touchscreen.
