Installation and Maintenance
107
RB6741-Z Touchscreen Security System User Manual
10
Insert the A/C adapter into the bracket.
Table 6-4. A/C Power Supply Ratings
Rating
Value
Voltage
90-264 VAC (115V nominal)
Current
0.5A rms max
Power
10W typical, 16W max
Frequency
47-63 Hz
11.
Remove the center screw from the wall
outlet.
12.
Plug the
Touchscreen’s A/C adapter into
the bottom plug of the wall outlet, and
replace the center screw through the
bracket hole. Screwing in the power
adapter to the wall outlet with use of the
bracket is for non-Canadian use.
The
Home
,
Menu
,
Back
, and
Emergency
LEDs are lit when the
Touchscreen has A/C power. After a few seconds, the Installation Welcome screen appears
on the Touchscreen.
Note:
If the Touchscreen does not display the Installation Welcome screen, reset it to the
factory default (see “Rebooting the Touchscreen” on page 96).
Replacing the Touchscreen Battery
To replace the Touchscreen battery, follow steps 2 through 5
under “Installing the
Touchscreen
” on page 105.
WARNING:
The rechargeable battery that comes with your Touchscreen is only
available through your service operator. If your battery needs to be replaced,
contact your service operator to arrange for replacement.