Using the Key
Pad
113
RB6741-Z Touchscreen Security System User Manual
Arm Away Mode
Enter a valid keypad code followed by the
button to arm the system in Arm Away mode
(no one still in the premises). For a description about this arming mode, see page 40.
The
button turns red for 3 seconds to indicate that the Exit Delay has started (default 30
seconds
—Touchscreen beeps during this period). If the system is not ready (because, for
example, a door or window is opened) the button flashes orange seven times.
Arm Stay
Enter a valid keypad code followed by the
button to arm the system in Arm Stay mode
(there are still people within the premises). For a description about this arming mode, see
page 41.
The
button turns red for 3 seconds to indicate that the Exit Delay has started (twice as
long as the period configured for Arm Away
—up to 120 seconds with no beeping from the
Touchscreen). If the system is not ready (because, for example, a door or window is
opened) the button flashes orange seven times.
Disarming the System
Enter a valid keypad code followed by the
button to disarm the system.
The
button turns green for 3 seconds to indicate that the system has been disarmed.
There is no Entry Delay period.
Sending an Emergency Police Alarm
Press and hold the shield and asterisk button for 2.5 seconds to send an audible panic alarm
to the central-monitoring station for police assistance.
The LED flashes red to indicate that the alarm has been sent. Additionally, contact persons
will receive email and SMS notifications if they are configured to do so.
