![background image](http://html.mh-extra.com/html/smc-networks/oaziss-aegis-rb6741-z/oaziss-aegis-rb6741-z_user-manual_1300605043.webp)
Managing Your Security
System
43
RB6741-Z Touchscreen Security System User Manual
– Otherwise, the system is automatically armed in Arm Stay mode. There is still an Exit
Delay period for the other Arming modes as well, but they do not require that the
door open and close during the period.
– If you open and shut an Entry/Exit door during the Exit Delay and then re-enter the
premise, the Exit delay restarts at 120 seconds for Arm Stay and Arm Night or 60
seconds for Arm Away. It only does this one time. If the wrong code is entered, the
countdown timer resets to 60 or 120 seconds.
– If an Entry/Exit door is left open at the end of Exit Delay, the Entry Delay immediately
starts and, if the system is not disarmed, an alarm sounds.
Bypassing Zones
To arm the system, the Touchscreen requires that a sensor zone be turned off (bypassed), if
it has any of the following troubles:
Sensor Tamper Detected
Tamper Detected
Sensor Communication Failure
It is NOT necessary to bypass for any other troubles. Instead, you must acknowledge the
trouble before arming the system.
Note:
Fire/smoke and carbon monoxide sensors cannot be bypassed.
Cancelling the Arming Process
If you arm the system in Arm Away or Arm Stay mode, the Security Status header displays a
countdown of the number of seconds until the Exit Delay is over. You can choose to cancel
the arming process.
To cancel the arming process:
1. Tap the Security Status header while it is displaying a countdown. The Security app
appears, with a keypad and the Disarm System tab active. The view from the camera(s),
if any, appears.