Managing Your Security
System
49
RB6741-Z Touchscreen Security System User Manual
Note:
If the
Enabled
button is already displayed, tap
Enabled
to choose to have
your test alarms NOT sent to central monitoring. If you enable Send Test Alarm
Messages, contact your central-monitoring station and tell them you are testing your
system.
3. Tap the
Next
button. The Alarm Test Checklist appears.
4. Ensure all the security zones are unfaulted (that is, doors and windows are closed,
motion detectors are not showing motion, and so on). When the security zones are ready
for testing,
Ready to Arm
appears under the
Arm
button.
5. Tap
Arm
. Your security system is armed in the special Test mode. The Exit Delay is only
10 seconds long. Motion sensors are turned off (not tripping alarms but recording
events) until an Entry/Exit security zone is faulted. The
Arm
button changes to a System
Armed notice.
6. Tap
Next
. The Alarm Test screen appears.