- 8 -
2.2 Product configuration
The product configuration of this controller is as follows.
●
Electric actuator *
1) *5)
CC-Link
Prepared by user
*6)
●
Controller
to CN5
*1) *6) *6)
*3) *4)
●Power supply plug (accessory)
Applicable cable size
AWG20 (0.5mm
2
)
*1) These items are included when ordered using the part number for the electric actuator set.
*2) The controller setting software must use the latest version.
For version information and upgrade, please refer to the SMC website. http://www.smcworld.com/
*3) When conformity to UL is required, the electric actuator and controller should be used with a UL1310
Class 2 power supply.
*4) 24 VDC power supply for controller input and 24 VDC power supply for I/O signal should be separated
*5) Be sure to prepare a terminating resistor and a PC.
*6) Optional.
Warming
Refer to section
“5. External Connection for wiring”
Refer to
“17. Precautions for wiring and cables”
when handling the wiring and cables.
Do not connect the teaching box, LAN equipment, or LAN cable directly to a PC.
Otherwise, the controller, PC or equipment may be damaged.
PLC
*3) *4)
to CN3
to CN2
●Actuator cable
Part No: LE-CP-
□
-S
LE-CP-
□
-B-S
(Standard cable)
LE-CP-
□
LE-CP-
□
-B
(Robotic type cable)
Power supply
24 VDC
Controller power supply
24 VDC
to CN1
to CN4
Terminating
resistance
Communication
plug connector
LEC-CMJ-
□
●Controller setting kit
*2) *5)
Part No
：
LEC-W2
●Teaching box
(With 3m cable)
Part No
：
LEC-T1-3
□
G
□
