![background image](http://html1.mh-extra.com/html/smc-networks/lecpmj-series/lecpmj-series_operation-manual_1299638081.webp)
- 80 -
15.2 Alarm details
Alarm
(code)
G
rou
p
How to
deactivate
Alarm contents/ Countermeasure
Step data ALM1
(1-048)
B
RESET
input
<Contents>
The step data is in-correct for the following conditions
(Assignable value range)
(1) “Area1” < “Area2”
(If both “Area1 and Area2” is 0, the alarm will not be activated.)
(2)
“Trigger LV” ≤ “Pushing force”
(If Pushing force< “Trigger LV” at the time of “Pushing force” = 0,
the alarm will not be activated.)
(3) Minimum speed of electric actuator
≤ “Pushing speed” ≤ “Speed”
(4)
“Pushing speed” ≤ Maximum pushing speed of the electric
actuator.
(5) Pushing force
≥ Minimum pushing force of the electric
actuator.
(6)
Basic parameters “
Max force
” ≥ Minimum pushing force of the
electric actuator.
(7)
Basic parameters “
Max force
” ≥ “
Trigger LV
”
<Countermeasure>
Modify the step data and basic parameters setting.
Caution
Please confirm this pushing force and minimum speeds of Data
maximum speed and 0 or more of the electric actuator with the
electric actuator manual or the catalog
Parameter ALM
(1-049)
B
RESET
input
<Contents>
The basic parameter is not correct for the following condition:
(Assignable value range)
(1) Stroke (-) < Stroke (+)
(2) W-Area 1 < W-Area2
(If both W-Area1 and W-Area2 is 0, the alarm will not be activated.)
(3) Maximum pushing force < Maximum pushing force of the
electric actuator
<Countermeasure>
Modify the basic parameter setting
Caution
Please refer to the manual or the catalogue of the electric
actuator for the max / min pushing force / speed for the electric
actuator.
Small Dec (1-050)
B
RESET
input
<Contents>
Step data in which a deceleration speed exceeding the stroke
limit is specified.
<Countermeasure>
Modify the Deceleration value to a value with a sufficient margin
so that the electric actuator can stop within the stroke limit.