- 46 -
5.5 Measurement
The position sensor (encoder) built into the Card Motor detects the travel distance of the table, and
measures the dimensions of the workpiece.
LAT3-
□
LAT3F-
□
Encodder resolution
(
μ
m)
30 5
2.5
1.25
Note 1)
Connected model
MANUAL
Multiplier factor
X4
X1
X2
X4
Value per 1 pulse
00.0300
00.0050
00.0025
0.00125
Decimal point position
∗∗
.
∗∗∗∗
∗
.
∗∗∗∗∗
Input signal type
2PHASE
Note 1) Since the CEU5 Multi-counter has a 6-digit display, the decimal numbers will not be displayed
when the resolution is set to 1.25.
Caution
The Multi-counter may lose pulses when a long counter cable is used or the Card Motor travels at high
speed.
(1) Push the tool against the reference
level, and reset the counter.
(2) The tool is withdrawn.
(3) Push the tool against the
workpiece to measure the workpiece
dimension. (The counter displays
and outputs the dimension.)
Card Motor
Jig
Tool
Workpiece
Controller
CEU5 Multi-counter
(Optional accessory)
0.000
9.000
7.530
Dimension of the workpiece
Reference level
RS232C or BCD signal output
CEU5 Multi-counter
settings