- 52 -
(7) Do not scratch or damage any sliding part by hitting it with an object.
The components are manufactured to high precision. Therefore even a slight deformation may
cause operation failure.
(1) Mount the Card Motor on a base with good cooling performance, for example a metal plate.
If the cooling performance is not good enough, the temperature of the Card Motor will increase,
which may cause damage.
(2) Do not apply strong impact or excessive moment while mounting a work piece.
The product may overheat during operation and a temperature error or failure may occur.
(3) Do not dent, scratch or cause other damage to the mounting surface of the table and rail.
It can cause reduction in flatness, play in the guide and increase in the sliding friction.
(4) When mounting the Card Motor, use stainless steel screws with appropriate length and
tighten with recommended tightening torque.
If the maximum screw-in depth is exceeded, it may damage the internal components.
Using a tightening torque higher than the specified torque may cause malfunction, and using a lower
tightening torque may displace the work piece or cause it to drop off.
1
)
Body mounting from the bottom / tapped type
Screw material
SUS
Screw dimensions
M3 x 0.5
Recommended tightening torque [Nm]
0.48 to 0.63
L1 (Maximum screw-in depth) [mm]
4.6
L2 (Plate thickness) [mm]
2.1
2
)
Body mounting from above / through hole type
Screw material
SUS
Screw dimensions
M2.5 x 0.45
Recommended tightening torque [Nm]
0.27 to 0.36
L3 (Maximum screw-in depth) [mm]
2.5
L4 (Plate thickness) [mm]
2.1
3
)
Work piece mounting / top mounting type
Screw material
SUS
Screw dimensions
M3 x 0.5
Recommended tightening torque [Nm]
0.48 to 0.63
L5 (Maximum screw-in depth) [mm]
2.5
(5) When connecting the cables, avoid applying any stress to the connector from the cable side.
If an external force or vibration is applied to the connector, damage may result. Do not bend the
cable for approximately 20 mm from the connector and fix this part of the cable with a cable fixture.
Caution