background image

FOREWORD

DAEDONG Corporation wishes to thank you for purchasing your new DAEDONG diesel engine. Your new engine is
the result of many years of research and development and high quality manufacturing; and we are confident that
your new engine will provide many years of safe, reliable and economical operation. This Operator’s Manual is
intended to help you get the maximum return on your investment and to ensure your safety.

1

379O001A

(1) Engine model name and serial number

We recommend that you thoroughly read and under-
stand this Operator’s Manual before handling, storing,
installing, operating or servicing the engine.

It is the policy of DAEDONG to incorporate new technol-
ogy and product improvements on an ongoing basis. In
order to provide the latest technology and the best en-
gine available, there may be some minor differences
between this manual and your engine. Consult your
dealer if you have any questions.

Should your engine require parts or service, please con-
tact your local DAEDONG dealer. Your dealer will need
the following information in order to assist you.

1. Engine make, model number and serial number.

2. Names and code numbers of parts to be ordered.

3. Make and model number of the machine in which

the engine is installed.

Summary of Contents for 3C093




















































Reviews: