![background image](http://html1.mh-extra.com/html/smc-networks/lat3-series/lat3-series_operation-manual_1299750012.webp)
- 11 -
(2) Inching a set distance
The Card Motor can be jogged a certain distance at a time as follows.
(i) Click the [Servo Off] button to energize the motor.
(ii) Click the [Return to Origin] button to move the table to the Origin Position.
(iii) Enter the desired inching [Speed].
(iv) Enter the desired [Travel Distance].
(v) When either the [+ (Connector Side)] or [- (Opposite Side)] button is clicked once, the table will
move the set travel distance in the specified direction at the set speed.
If it is necessary to stop the operation, press [Servo On] (vi) to de-energize the Card Motor.
Warning
Consider the operational behavior of the table when the power supply to the motor is turned off.
When the [Servo On] button is clicked, the Card Motor will be de-energized, the table will no longer
be fixed and can be moved by external forces. Ensure that the table movements cannot cause any
human injury or damage to the equipment.
Caution
The table will not move outside of the stroke range.
When jogging or inching, the table stops at the stroke end, and does not move outside of the stroke
range even if the button is pressed.
(ii)
(iii)
(iv)
(i)
(v)
(vi)