- 9 -
No.JXC
※
-OMV0005-A
2.4 Start up procedure
Install, wire, set and operate the controller referring to the procedure below when the product is used
for the first time.
(1) Checking the contents of the package
After unpacking everything, check the description on the label to identify the controller and the number
of accessories.
Product name
Quantity
Controller
(JXCL
1□-□)
1 pc.
Power supply plug
(
JXC-CPW
)
1 pc.
IO-Link communication plug
(JXC-CL-S)
1 pc.
Actuator
1
1 pc.
1. These items are included when ordered
using the part number for an actuator set.
[Options]
•
Controller communication cable(Part No: JXC-W2A-C)
•
USB cable (Part No: LEC-W2-U)
•
Teaching box (Part No: LEC-T1-3
G
)
If any parts are missing or damaged, please contact your distributor.
(2) Mounting the controller
Refer to section
3.4 Mounting (P.
for instructions on how to mount the controller.
(3) Wiring and Connection
Connect the cables to the controller.
Refer to
5. External Connections (P.
for the wiring of the connectors.
(4) Supply of power
Supply power 24VDC to the JXC controller.
If the condition is normal, LED on the front of the controller turns ON as shown on the table below
Items
LED condition
Status
PWR
Green LED is ON
Supply power
ALM
OFF
No alarm
Refer to
8. LED display (P.
for the explanation of LED lamps.
If the red [ALM] LED on the front of the controller (JXC) is ON, an alarm has been triggered.
Caution
When an alarm is generated
Refer to a corresponding memory of IO-Link or connect a PC or teaching box to the SI serial I/O
connector and check the details of the alarm. Then, remove the cause of the error referring to the
17. Alarm for Motor Control (P.
Please refer to the manuals of the controller setting software or the teaching box for details of the
alarms.
Teaching box
(Conversion cable is needed)
Controller
Power supply plug
(JXC-CPW)
Option
Controller
communication cable
USB cable