![background image](http://html.mh-extra.com/html/smc-networks/jxcl1-series/jxcl1-series_operation-manual_1299622026.webp)
- 25 -
No.JXC
※
-OMV0005-A
7. IO-Link communication plug
7.1 IO-Link communication plug specification
Specifications for the IO-Link communication plug.
Pin No. Terminal
Functions
1
L+
+24 VDC for IO-Link communication power supply.
IO-Link communication starts when the power supply
L+/L- and C24V control power are supplied to the JXC
controller.
2
N.C.
Not connected
3
L-
0 VDC for IO-Link communication power supply
4
C/Q
IO-Link signal.
Phoenix Contact product number: FMC1,5/4-STF-3,5 or equivalent.
7.2 Electric Wiring Specifications
Prepare the wiring according to the following specifications (to be prepared by the user).
Description
Specification
Applicable wire size
Single wire, stranded wire
AWG24-16 (0.2-1.5 mm
2
)
The rated temperature of the insulation coating should be 60
o
C or more.
The O.D. should be ø2.5 mm or less.
Conductor resistance 3 ohms or less
Conductor capacitance 3 nF or less
Stripped wire length
Cable length
20 m or less
Caution
Do not connect multiple wires to one terminal.
After wiring the IO-Link communication plug, connect it to the IO-Link connector on the controller.
Controller
IO-Link communication plug
Caution
Do not connect or disconnect the IO-Link communication plug while IO-Link communication or
power is connected.
Otherwise, the circuit in the controller may be damaged.
IO-Link
communication
plug
To IO-Link
communication
connector
8-10mm
ϕ2.5mm or less