![background image](http://html.mh-extra.com/html/smc-networks/jxcl1-series/jxcl1-series_operation-manual_1299622030.webp)
- 29 -
No.JXC
※
-OMV0005-A
Byte No.
Bit
Signal name
Description
1
11
INP
The condition
when “INP” turns ON depends on the actuator
action.
•Return to origin
Turns ON at the origin when within the ±"default in position" in
the Basic parameters.
•During positioning operation
Turns ON when the current position is within "Step data position
+/- positioning range".
•During pushing operation
Turns ON when the pushing force exceeds the value set in the
step data “Trigger LV”.
Caution
After the pushing operation is completed, even if it switches
automatically to energy saving mode,
“INP” remains ON.
When movement starts again from the pushing stopped state,
pushing operation is repeated with the normal pushing force.
(E.g.) Step data “force” is 100%
Step data “Trigger LV” is 80%
The energy saving setting of the actuator is 40%
The actuator model determines the energy saving
settings. Please refer to the manual of the actuator for
more details.
12
AREA
When the actuator is within the output range between Area1 and
Area2 in the step data, this terminal will turn ON.
The area output setting range changes depending on the active
step data.
13
WAREA
When the actuator is within the output range between "W area 1
and W area 2" of basic parameter, this terminal will turn ON.
14
ESTOP
During activation of the Teaching Box stop switch, this signal is
ON. During the normal operation, it is OFF.
This is synchronized to the input for the EMG signal on the
controller PWR connector.
15
ALARM
ALARM turns on when an IO-Link "event" occurs in the JXC
controller.
ALARM turns on when an IO-Link "event" occurs in the JXC
controller.
•Alarm for Motor Control has been generated.
•C24V has not been supplied to the controller.
A generated "event" can be confirmed using Device Status (Index
0x0024,SubIndex 0x00) and Detailed Device Status (Index
0x0025,SubIndex 0x01/0x02) in the device parameters for
IO-Link communication.
When an alarm relating to the motor control is generated, the
contents can be checked in the current alarm in the SMC
parameters (Index 0050,SubIndex 0x01-0x04).
ALARM is off when no "event" has been generated.
Tligger LV
Pushing force
Energy saving mode
Time
INP output [ON]
100
80
40
(%)