![background image](http://html.mh-extra.com/html/smc-networks/jxcl1-series/jxcl1-series_operation-manual_1299622021.webp)
- 20 -
No.JXC
※
-OMV0005-A
6. Details of Power Supply Plug
6.1 PWR: Power supply plug specifications
The specifications of the power supply plug supplied with the controller are shown below.
Power supply plug
Pin No.
Terminal
Function
Functional explanation
1
C24V
Power supply (+)
The positive control power.
2
M24V
Motor power (+)
The positive power for the actuator
motor to be supplied via the controller.
3
EMG
Stop (+)
The positive power for Stop signal
4
0V
Common power (-)
The negative common power for M24V,
C24V, EMG and LK RLS.
5
-
NC
N/A
6
LK RLS
Unlocking (+)
The positive power for lock release.
Equivalent to Phoenix Contact: DFMC1, 5/3-ST-LR
6.2 Electrical Wiring Specifications
Prepare the electrical wiring according to the following specifications (to be prepared by the user).
Item
Specifications
Applicable wire size
Single, stranded wire
→ AWG20 (0.5mm
2
) / Max. 10m
The rated temperature of the insulation coating should be 60
o
C or more.
The O.D. should be ø2.5mm or less.
Stripped wire length
Wire length
10 m or less
Caution
Do not connect multiple wires to one terminal.
After wiring the power supply plug, connect it to PWR power connector of the controller.
Refer to
6.3 Power Supply Plug Wiring (P.
for wiring.
Controller
Power supply plug inserted into PWR
8mm
ø2.5mm or less
Power
supply
plug
To PWR