SMC Networks HRZD020-W1S-W1S, Operation Manual

Page: 89 / 129

HRX-OM-M005
Chapter 5 Product Operation
HRZD Series 5.3 Operation Screen
5-45
5.3.27 CH1(2) Compressor ECO Limit setting screen
The Compressor ECO Limit Setting screen enables the setting of a limit to
compressor performance.
Figure 5-75 “Compressor ECO Limit Setting Screen”
Table 5-30 “Compressor ECO Limit Setting Screen”
No. Item
Setting
range
Descriptions
Factory
default
1 [SEL] key ON, OFF
“C.E” is displayed in CNT on the Main screen and the
LIMIT value is displayed on the “Status screen 2”
when this is valid (set to ON).
OFF
2 [SET] key
―――
Used to display the “Ten-key screen”. 100%
3 [Enter] key ―――
Used to display the “MESSAGE screen” to accept the
setting.
－
4 [Initial] key ―――
Used to display the “MESSAGE screen” to initialize
the setting.
－
5 [Cancel] key
―――
Used to cancel the setting.
－
6 [Return] key ―――
Used to display the “CH1(2) control setting screen”
on page 5-44.
－
7 Output indicator
―――
This indicates the current output of the compressor.
－
[Tips]
The setting of a LIMIT value takes effect only when the [ENTER] key is
touched with ON-OFF setting set to ON.
The indicator is designed to turn red when an output value exceeds the limit.
The setting range is displayed on the “Ten-key screen” with the touch of the
[SET] key.
5 6 4 3
1
2
7