SMC Networks HRZD020-W1S-W1S, Operation Manual

Page: 96 / 129

HRX-OM-M005
Chapter 5 Product Operation
5.3 Operation Screen HRZD Series
5-52
5.3.34 Purge mode screen
Figure 5-82 “Purge Mode Screen”
Table 5-37 “Purge Mode screen”
No. Item Descriptions
STOP Collection stopped
PURGING During collection
1
FINISH
Collection completed
successfully
Circulating fluid collection is automatically finished
when completed successfully.
The ERROR window is displayed in the event of
an error. See page 5-53 for details.
1 [SET] key Used to display the “Ten-key screen” to set the CH1(2) TIME-OUT.
The following “MESSAGE screen” is displayed
when the product is capable of fluid recovery.
2 [Start/Stop] key
Used to start/stop circulating
fluid collection of CH1(2).
The following “MESSAGE screen” is displayed
when the product is not capable of fluid recovery.
3 [Return] key Used to display the “Detail setting screen 2” on page 5-23.
[Tips]
The TIME-OUT period is factory-configured to 300 seconds.
The setting range is displayed on the “Ten-key screen” with the touch of the
[SET] key.
Reasons of
incapable fluid
recovery
3 2 1 2 1
This indicates the status of auto
circulating fluid collection.
STOP: Recovery stopped
PURGING: During collection
FINISH: Recovery completed
Circulating fluid recovery is
forcefully terminated if it fails to
be completed within the set
TIME-OUT period.
The “Purge Mode screen” is displayed only if the Automatic circulating fluid
collector (optional) is provided.