SMC Networks HRZD020-W1S-W1S, Operation Manual

Page: 25 / 129

HRX-OM-M005
Chapter 3 Transporting and Installation
HRZD Series 3.1 Transporting
3-1
Chapter 3 Transporting and Installation
3.1 Transporting
The product is heavy and has potential danger during transport. Also, to prevent
damage and failure of the product, be sure to follow these instructions for
transport.
If a fork lift is used for transport, check the forks are inserted in the
correct place, refer to section “3.1.1 Transporting with forklift” .
Proper procedure must be followed when using this product.
Exercise caution to assure personnel safety during the installation,
operation, maintenance and inspection of the product.
Only personnel, who have adequate knowledge and experiences with
not only the product but associated equipment are allowed to perform
transport, installation, and maintenance involving potential hazardous
task.
Never lay down the product. Oil in the compressor drains into the
refrigerant piping, which causes lubricant shortages leading to
damage to the compressor.
Drain the remaining fluid out of the piping as much as possible.
The remaining fluid may spill if disregarded.
Exercise caution not to damage the panel and piping with the forklift
when transporting the product.