SMC Networks HRZD020-W1S-W1S, Operation Manual

Page: 78 / 129

HRX-OM-M005
Chapter 5 Product Operation
5.3 Operation Screen HRZD Series
5-34
Procedure for setting RUN, REMOTE, and OUT1 to OUT6
1.
Touch the arrow [
▲
][
▼
] keys ([
▲
] key
only for RUN and REMOTE).
The box appears flashing. A set value changes
with each touch of the key.
Figure 5-48 “CH1(2)DIO Communication Setting Screen 2”
[Tips]
The setting has not taken effect while the box is flashing.
2.
Touch the [Enter] key.
The “MESSAGE screen” is displayed.
Figure 5-49 “CH1(2)DIO Communication Setting Screen 2”
3.
Touch the [YES] key.
The setting takes effect.
Figure 5-50 “MESSAGE Screen”
[Tips]
The setting is not performed when the [NO] key is touched, which causes the
“CH1(2)DIO Communication Setting screen 2” where the box is flashing to be
displayed.
Box