Highlight the box beside
Motion
and press the
button. You can select the cameras for which you want
any reports of motion detection.
Highlight the box beside
Video Loss
and press the
button. You can select the cameras for which you
want any reports of lost video.
Highlight the box beside
Text-In
and press the
button. You can select the text-in devices which you
want any report of text input.
Highlight the box beside
Record Channels
and press the
button. You can select the cameras that
you want to search for any reports of event recorded data. The DVR will display the events (not the camera
channels) that occurred and that also are recorded on the camera channel that you selected. If you do not
select a camera channel in this field, the DVR will search events that are not associated with cameras.
You can also toggle On and Off self-diagnostic events as part of your search. The choices are:
y
Panic Record
y
Check Recording
y
Check Alarm-In
y
Disk Almost Full
y
Disk Bad
y
Disk Temperature
y
Disk S.M.A.R.T.
Once you set your desired search conditions, highlight
Search
and press the button to display the
search results in the
Event Log Search
screen. Selecting
Cancel
exits the screen without saving the
changes.
Text-In Search
Figure 119 — Text-In Search screen.
The DVR maintains a log of each time there is Text Input. The
Text-In Search
screen displays this list.
Use the arrow buttons to highlight the event for which you would like to see video.
