Turning
Zone View
On will allow you to observe how the DVR is reacting to motion. When in the
motion viewing mode, the detection zone of video will be displayed. Any detected motion within the
zone will be displayed in red.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box
under the
Zone
heading, and press the button. The
Motion Detection Zone
screen displays.
Figure 83 — Motion Detection Zone screen.
The
Motion Detection Zone
screen is laid over the video for the selected camera. You can set up motion
detection zones by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in groups of 8 or 16 individual block
groups (8- and 16-channel DVR respectively). A block group is positioned within the image area
using the Up and Down arrow buttons, and individual blocks within the block groups are selected
or cleared using the camera buttons.
Press the
button to display the menu screen. The menu on the setup screen has the following functions:
Select
— Activates highlighted blocks to detect motion.
Clear
— Deactivates highlighted blocks so that they will not detect motion.
Reverse
— Activates inactive highlighted blocks and deactivates active highlighted
blocks.
Select All
— Activates all blocks to detect motion.
Clear All
— Deactivates all blocks so that they will not detect motion.
Reverse All
— Activates inactive blocks and deactivates active blocks.
OK
— Accepts changes and closes Zone setup.
Cancel
— Exits Zone setup without saving changes.
Figure 84 — Motion Detection Zone menu.
You can control excessive event logging and remote notification of motions detected after the motion dwell
time by adjusting the motion ignoring dwell intervals. Highlight the box beside
Motion Ignoring Interval
and press the
button. A list of intervals ranging from 1 to 5 seconds or
Never
appears. The DVR will
not log and notify motion events occurred during the preset interval range.
NOTE: The record action for motion events will not be affected by the Motion Ignoring function.
