NOTE: Descriptions of the Record icons in the
Type
column are as follows:
Time-lapse (Time)
Alarm-In
Motion
Video Loss
Text-In
NOTE: Channels that are not defined will use the setting values of the previous schedule item.
NOTE: When multiple events are detected at the same time from a specific channel, the DVR will
record event video with the high setting values if the ips, Quality, Resolution and Dwell values of
events are different from each other. However, the ips will be reset to the supported maximum value
when the ips, Quality, Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Highlight the box under the
heading
and press the
button to delete the recording settings. You will
be asked to confirm that you want to delete the settings.
Highlight
Default…
and press the
button. The Default screen appears.
Figure 72 — Default (Advanced Mode) setup screen.
Highlighting boxes under
ips
and pressing the
button allows you to set the images per second for
Time and Event recording. You can select from 1.00 to 30.00 ips (25.00 ips PAL).
Highlighting boxes under
Quality
and pressing the button allows you to set the recorded image
quality for Time and Event recording. You can select from:
Very High
,
High
,
Standard
and
Low
.
Highlighting boxes under
Dwell
and pressing the button allows you to set the length of time you
would like to record for the associated event. (Advanced Mode Only)
You can save your changes by highlighting
Save
and pressing the
button. Selecting
Cancel
exits the
screen without saving the changes.
Pre-Event Screen
Highlight
Pre-Event
in the Record menu and press the
button, and the
Pre-Event
setup screen appears.
If you do not have Event set up in the Record Schedule, a message will display alerting you to this fact.
