32
Artikel-Nr. Skylotec Beschreibung 1
German
Englisch
Bild
JP-009-1
JACKPOD
Winch Drive
Getriebeuntersetzung Drive 4: 1 (Max
Eingangsdrehzahl 1200 Upm)
ohne Kupplung
Gear Reduction Drive 4:1
(Max input 1200 rpm, NO
Clutch)
JP-009-2
JACKPOD
Winch
Direct Drive
Direct Drive
(Max Eingangssdrehzahl 300 Upm)
ohne Kupplung
Direct Drive (Max input 300
rpm, NO Clutch)
JP-009-3
JACKPOD
Overload Protec.
Überlastschutz-Kupplung
mit 200 Kg Überlastschutz
450 LBS Overload Protec.
Clutch
Figure 6, Jackpod Series Winch Removable Handle & Power Drive Accessories
Configuration
are per figures
#
Minimum
Drill Torque
(Ft-lb /n-m)
Max. Drill Speed
(RPM) for
rescue/
Material handling
(110 lbs/50 kgs)
Maximum Drill
Speed (RPM) for
Work Positioning
Reccomended Drill Make
& Model
Figure/Abb. 8
40 / 54.2
300
NOT permitted
Milwaukee Hole Hawg Drill
(Model #1676-6) Corded
120V AV
Figure/Abb. 9
10 / 13.6
600
400
Milwaukee Right Angle
Drill (Model #0721-21)
Cordless 28V DC
Figure/Abb. 10 40 / 54.2
300
NOT permitted
Milwaukee Hole Hawg Drill
(Model #1676-6) Corded
120V AV
Figure/Abb. 11 10 / 13.6
600
400
Milwaukee Right Angle
Drill (Model #0721-21)
Cordless 28V DC
The use of HIGH SPEDD (RPM) drills will result in damage and premature failure of winch components.
Figure 8, Drill Requirements for Various Configurations
Figure 9 below shows the simplest option of directly driving the input hub using a solid drive shaft and a
low speed high torque drill.*
Combine these accessories as shown in Figures 8-11 to make the configuration best suited to your
application.
GB
