Ski-Doo 2005 MACH Z, Shop Manual, Page: 75 / 343

Section 02 ENGINE
Subsection 07 (TOP END)
A35C0ZA
CAUTION: Do not pry out combustion cham-
ber. It could damage the surface contact of
cylinder head.
A35C10A
Cylinder Block
Unscrew cylinder block screws no. 7 and no. 8
then remove the cylinder block no. 9 .
NOTE: If engine is in vehicle, lean cylinder block
toward rear to withdraw.
Piston
With a pointed tool inserted in piston notch, re-
move circlips
no. 11 from piston no. 6 .
A02C29A
TYPICAL
Using piston pin puller/installer (P/N 529 036 002),
extract piston pin from piston.
A02C2CA
TYPICAL — PISTON PIN EXTRACTION
Decompressor
Mach Z
Do not remove decompressor plug no. 23 need-
lessly.
CLEANING
Discard all gaskets and O-rings. Use Loctite
Chisel (P/N 413 708 500) to clean mating sur-
faces.
Clean all metal components in a non-ferrous metal
cleaner.
54
mmr2005-117