Ski-Doo 2005 MACH Z, Shop Manual, Page: 122 / 343

Section 03 FUEL SYSTEM
Subsection 01 (FUEL TANK AND FUEL PUMPS)
To facilitate the installation, grommet should be on
smaller diameter of male connector.
Install grommet on fuel tank and push male con-
nector through grommet.
IN-LINE FUEL FILTER REMOVAL
Fuel filter, inlet and outlet hoses come as an as-
sembly.
A35I04A
FUEL FILTER LINE ASS'Y
The fuel filter line ass'y is located on LH side of
the vehicle underneath console.
A35I05A
1
1. Fuel filter line ass'y
Using B.U.D.S. release pressure from fuel sys-
tem. Refer to COMPONENT INSPECTION, RE-
PLACEMENT AND ADJUSTMENT.
Disconnect both ends of fuel filter line ass'y.
Unscrew fuel filter support nut then remove the
filter.
A35I06A
1
1. Unscrew fuel filter support
IN-LINE FUEL FILTER
INSTALLATION
Installation is reverse of removal procedure.
FUEL TANK REMOVAL
Using B.U.D.S., release pressure from fuel sys-
tem. Refer to COMPONENT INSPECTION, RE-
PLACEMENT AND ADJUSTMENT.
Remove seat, refer to BODY.
Remove fuel tank cap.
Remove filler neck plastic nut using wrench
(P/N 529 035 891).
529 035 891
A33C1TA
TYPICAL
Remove on both sides, fuel tank aluminum braces
and discard the following:
– Torx screws M8 x 13
– elastic flanged nuts M8.
106
mmr2005-123