Sitex SP38 Autopilot, Installation And Operation Manual, Page: 122 / 162

Sitex SP38 Installation and Operation Advanced Operation
Document PN 29010101 V2r0
- 1 21 -
Station Lock/Unlock
Setting the Station Lock parameter in the Standby menu to Lock prevents any of the Repeaters
from being able to take command. When station lock is set to Lock, the image of a key will be
shown in the upper right corner of the display, next to the repeater R.
The key image will either be outlined or filled-in, depending on whether the station lock is for the
main Control Head or an Auxiliary.
Figure 69 – Station Lock Icons on the screen
The controller In-command shows a locked locker icon. The Locker signifies that all stations,
except for the Master Control Head and the controller which is currently In-command, are locked
out.
Controllers that are Repeaters cannot take command.
Caution ! If your
SP38
system is equipped with Jog Levers, you must be aware that they can
be activated any time the autopilot is turned on. They can not be turned off or locked out. It
is your responsibility to see that appropriate measures are taken to ensure that they cannot
be activated by accident.