Simplex TFX-500M, Operator'S Manual

Page: 5 / 44

iii
Preface
About This Manual...
This manual is intended for use by those responsible for operating the Autocall TFX-500M and TFX-800M family of
fire control systems. The manual provides general instructions for operating an Autocall TFX-500M or TFX-800M
fire control panel.
Where to Look for More Information About
¼
TFX-500/800 System Installation
AUTOCALL TFX-500M and TFX-800M Operator’s Manual and Installation Guide, Publication Number 850515,
contains installation information for each of the AUTOCALL TFX-500M and TFX-800M system components.
Ancillary Devices
Each device is packaged with its own tecnical guide and installation instructions.
Programming the Autocall TFX-500M and TFX-800M
AUTOCALL TFX-500 and TFX-800 CONSYS
r
Programming Guide, (Publication Number 850463). Programming
the TFX Fire Control System via a personal computer
¾
only authorized and trained personnel may program the
Autocall TFX fire control system.
Ordering System Components, Spare and Replacement Parts
Contact your local Fire Protection Systems representative or contact Technical Services Department, 835 Sharon
Drive, Westlake, Ohio 44145. Phone (440) 871--9900.
NFPA Codes and Standards
NFPA (National Fire Protection Association) publishes codes and standards concerning all phases of fire protection.
Some publications that directly concern automatic fire detection and control systems include (but are not limited to):
NFPA 70, National Electrical Code; NFPA 72, Installation, Maintenance and Use of Protective Signaling Systems;
NFPA 101, Life Safety Code.
firealarmresources.com