Simplex TFX-500M, Operator'S Manual

Page: 38 / 44

AUTOCALL TFX Fire Control System Operator’s Manual
30
1. Select the “Open VFP?”menu option) and press YES/ENTER . The display will respond:
VFP into Panel: ___
2. Enter the number of the network panel that you wish to operate; for example 6 , and press
YES/ENTER .
3. You may now log on to Virtual Front Panel #6.
4. After you have completed the operations you wish at VFP #6, press QUIT the required number of
times to return to the main menu (at panel number 4).
Figure 3--9 Open VFP (Virtual Front Panel), available only on TFXnet network systems.
s
s
t
Y
N or
Y
Y
Open VFP?
VFP into Panel : ___
Enter Panel
Number
Other Network Panel Main Menu
Log on, perform functions, quit to return
to previous panel menu.
Do you want to
print data?
Next menu option
3.10. Print Data Menu
When selected, the options in this menu allow the contents of the Event Log, or the results of a Solo Test, to be printed.
Figure 3--10 Print Data menu options sequence.
s
s
t
Y
N or
t
Y
N or
Y
Do you want to
print data?
Print points
untested/failed?
Print event
log backtrack?
Do you want to
view the log?
Beginning Menu
Print backtrack
Print points
untested/failed
Test System
Select the “Print Data”option from the Main Menu. The menu options shown in Figure 3--10 sequence will be displayed.
Print Solo Test Points Not Tested/Failed -----A printout may be obtained, consisting of all points missed during a solo test,
or which failed to respond correctly.
NOTE: Do not wait for a long period of time after solo test termination before initiating the Print
Solo Test Points Not Tested/Failed, otherwise some of the log may have been cleared.
Proceed as follows:
Select the “Print points untested/failed”option from the Print Data menu. The display will respond with the following
message:
Zone no.:
firealarmresources.com