Simplex TFX-500M, Operator'S Manual

Page: 30 / 44

AUTOCALL TFX Fire Control System Operator’s Manual
22
Figure 3--4 View System Statuses menu options sequence.
s
s
s
s
t
Y
N or
t
Y
N or
t
Y
N or
t
Y
N or
t
Y
N or
s
s
t
Y
N or
View system
statuses?
Y
View system
Zones Alarm St?
View System
Zones Trouble St?
View system
Zones Isol. St?
View system
Common Alarm St?
View system
Common Trouble St?
View system
Common Disa. St?
Do you want to
set the clock?
Status Display
Status Display
Status Display
Status Display
Status Display
Status Display
Next Menu
1--8 0100 0000
9--16 0000 1000
View Zones Trouble Status ------ The Trouble/Clear status of each zone may be viewed. A “1”indicates that a zone IS in
fault, a “0”indicates that it is not. Thus, for the example given below, zones 5 and 9 are in fault. Pressing QUIT moves to
the Zone Isolate Status menu option. The Zone Trouble Status display is the following format:
Zones Trouble St.
1--8 0000 1000
9--16 1000 0000
View Zones Isolate Status ------ The Isolated/De-isolated status of each of the zones may be viewed. A “1”indicates that a
zone (or a point in the zone) IS isolated, a “0”indicates that it is not. Thus, for the example given below, all (or part) of zones
1 and 16 are isolated. Pressing QUIT will move to the Common Alarm Status menu option. The Zone Isolate Status display
is in the following format:
Zones Isol. St.
1--8 1000 0000
9--16 0000 0001
Note: By using the Trouble and Isolate status displays, a fault can be determined. A
“trouble”is a “fault”if it is not “isolation.”
View Common Alarm Status ------ The Common Alarm status of the system may be viewed. A “1”indicates that a Common
Alarm exists, a “0”indicates that it does not. Pressing QUIT will move to the Common Trouble Status menu option. The
Common Alarm Status display is in the following format:
Common Alarm St.
0
View Common Trouble Status ------ The Common Trouble status of the system may be viewed. A “1”indicates that a
Common Trouble exists, a “0”indicates that it does not. Pressing QUIT will move to the Common Disabled Status menu
option. The Common Trouble Status display is in the following format:
Common Trouble St.
0
Note: Common Trouble display occurs for either fault or isolate events.
firealarmresources.com