Configuration Functions
007-4382-002
81
Figure 3-46
SAN Mapping
Regardless of the topology, the bottom portion of the screen shown in Figure 3-46 will be
the same. Administrators must first choose the topology that best matches the SAN
environment, then configure the mapping. To change the topology, click the
Topology
drop down box, then press the
Select
button. The screen is then changed to contain the
appropriate values for the selected topology and controller/port combination.
Note:
Your subsystem will probably have multiple controllers and ports. If this is the
case, use the buttons in the
Portmap
area of the screen to configure the map for each of
them (the topology type is the same for all ports).
After all the changes have been made, click
APPLY
at the bottom of the screen.
The warnings given earlier in this section are repeated here:
Summary of Contents for TP9100
