manualshive.com logo in svg

Silicon Graphics TP9100, Installation Instructions And User Manual

Share
Download
Silicon Graphics TP9100 Installation Instructions And User Manual Download Page 22

6

007-4382-002

2: Installing, Configuring, and Running TPM on IRIX, Linux, and Windows

Please note the following information on operating system support:

•

TP9100 support for Linux has been frozen at Red Hat release 6.2 with Pro Pack 1.3,
using TPM 1.0 with controller firmware 6.14, 7.01 and 7.03. Support for the TP9100
on newer releases of Linux will not be developed.

•

TP9100 support for Windows has been frozen at Windows 2000 Advance Server and
NT 4.0 with service pack 6, using TPM 1.0 and controller firmware 6.14, 7.01 and
7.03. Support for the TP9100 on newer releases of Windows will not be developed.

•

Linux and Windows directories are provided on the TPM1.2 CD under the
unsupported directory. The images provided have not been rigorously tested for
reliable operation with all TP9100 configurations or features; therefore they are
available under the following two conditions:

•

Operation is not guaranteed

•

Support will not be offered

Summary of Contents for TP9100























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands