manualshive.com logo in svg

Silicon Graphics TP9100, Installation Instructions And User Manual

Share
Download
Silicon Graphics TP9100 Installation Instructions And User Manual Download Page 7

Contents

007-4382-002

vii

Reporting Functions    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .106

Set Default Screen Refresh Rate .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .107
Display (Dual) Controller Status     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .108
Topology Query   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .109
Display Statistical Data by Physical Device     .     .     .     .     .     .     .     .     .     .     .     .     .     .110
Display Statistical Data by Logical (RAID) Disk (6.14 Firmware Only)      .     .     .     .     .     .110
Display SCSI/Fibre Device Information    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .111
Display FULL Subsystem Configuration Information     .     .     .     .     .     .     .     .     .     .     .112
Display Physical Subsystem Information   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .114
Display Logical Subsystem Information    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .118
Display Environmental Subsystem Information   .     .     .     .     .     .     .     .     .     .     .     .     .120

Miscellaneous Functions  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .122

Display Status of Background Jobs .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .124
Flush Controller(s) Write Cache to Disk     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .127
Save Current Controller Configuration      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .128
Load Controller Configuration  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .129
Flash New Firmware Onto Controller(s)    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .130
Flash New Firmware Onto Supported Disk(s)      .     .     .     .     .     .     .     .     .     .     .     .     .131
Adjust Battery Settings    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .134
Clear Configuration   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .136
Set The Real Time Clock (7.01 and Later Firmware Only)     .     .     .     .     .     .     .     .     .     .137
View the Controller’s Internal Event Log (7.01 and later Firmware Only) .     .     .     .     .     .138
Identify a Disk (7.01 and later Firmware Only)     .     .     .     .     .     .     .     .     .     .     .     .     .140
Scan for New Enclosures and Disks      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .143
Save Controller Debug Dump    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .145
Stop Configurator Service Routine on Host     .     .     .     .     .     .     .     .     .     .     .     .     .     .146
Automatic Restart (Reboot) on Failure Parameter      .     .     .     .     .     .     .     .     .     .     .     .147

A.

TPMWatch Event Monitor and Logger

     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .149

Running the TPM 1.0 Version of TPMWatch From Linux and IRIX .     .     .     .     .     .     .     .     .150
Running the TPM 1.2 Version of TPMWatch From IRIX  .     .     .     .     .     .     .     .     .     .     .     .151
Running the TPM 1.0 Version of TPMWatch From Windows     .     .     .     .     .     .     .     .     .     .153
Master/Slave Controller Status Table    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .155
Partner Status Table    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .157

B.

Error Codes

     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .161

Summary of Contents for TP9100























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands