manualshive.com logo in svg

Silicon Graphics TP9100, Installation Instructions And User Manual

Share
Download
Silicon Graphics TP9100 Installation Instructions And User Manual Download Page 31

Configuring Usernames and Passwords

007-4382-002

15

Uninstalling TPM on Windows NT or Windows 2000 Advanced Server Platforms

To perform the uninstall, follow the procedure listed here.

1.

Go to Start –> Settings –> Control Panel and double-click

Add/Remove Programs

.

2. In the list that appears, select the SGI TP9100 Array Manager software entry and

click

 Change/Remove

.

3. Click

Yes in the Confirm File Deletion

 dialog box

.

A dialog box appears that indicates that the SGI TP9100 Array Manager software
has been successfully uninstalled from your machine.

4. Click

OK.

The TPM software is removed.

5. Click

Close

on the Add/Remove Programs Properties dialog box to close it.

6. Close the Control Panel window.

Configuring Usernames and Passwords

TPM’s security mechanism is simple. Just edit the

passwd.txt

file, and make changes

as necessary (only the system administrator should have access rights to this file). Each
line serves as new username and password combination. The username and password
are separated with a single colon (username:password). The colon character is not
allowed in either the username or password, everything is case-sensitive, and the
username, password, or both fields can be blank.

Summary of Contents for TP9100























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands