Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 102 / 182

86 007-4382-002
3: Using TPM
View/Modify RAID Controller Configuration
This menu selection lets you make changes to your controller. The most important thing
to know is that changes labeled
On-the-fly are immediate. Those marked Reset require
a controller reset to become effective. The two choices labeled New Config can only be
made when there are no defined LUNs, as they are data-destructive. When you click
View/Modify RAID controller configuration , the dialog boxes appear as shown in
Figure 3-50 and Figure 3-51 (for controllers with 6.14 firmware), as shown in Figure 3-52
and Figure 3-53 (for controllers with 7.01 firmware), and as shown in Figure 3-54 through
Figure 3-56 (for controllers with 7.75 firmware). A partial dialog box is shown in each
figure.