Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 18 / 182

2 007-4382-002
1: Introduction
Features
TPM is designed to support the TP9100 external RAID subsystem. The TPM application
provides the following functions:
• Configuration: Adds, deletes, and modifies LUNs, topologies, and device status.
• Administration: Configures controllers, administers LUNs, and takes controllers
online and offline.
• Reporting: Presents statistical data and subsystem status.
• Maintenance Procedures, such as RAID controller and drive firmware downloads.
Software Packaging
The software is packaged differently for IRIX/Linux than for Windows. The following
sections describe both.
IRIX/Linux Software Packaging
For IRIX and Linux, the TPM software is distributed on a CD-ROM that contains the files
shown in Table 1-1. The files must be located in the
$DAM_HOME
directory tree. By
convention,
$DAM_HOME
is set to
/opt/dam
, and this manual uses
$DAM_HOME
and
/opt/dam
interchangeably.
Table 1-1 Files in the Distribution (IRIX and Linux)
Files Description
cgi-bin/oemparts.txt
Cross-reference file for spoofing make and model of
subsystem.
cgi-bin/oemtail.html
HTML segment that appears at the bottom of most Web
pages.
tpm
TPM service routine.
dameventlog
Log file (automatically created if not found).