Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 154 / 182

138 007-4382-002
3: Using TPM
View the Controller’s Internal Event Log (7.01 and later Firmware Only)
When the View the Controller’s Internal Event Log menu selection is made, the dialog
box shown in Figure 3-106 appears.
Figure 3-106 View Controller’s Internal Event Log
Each time you bring up this dialog box, it displays the events that occurred since the last
time the dialog box was brought up.
The buttons at the bottom of the dialog box provide these functions:
• Save All: saves all events to a raw data text file named
eventhistory.log.
• Save New: saves the new events to a raw data text file named
eventhistory.log.
Note: A Save New operation overwrites the current
eventhistory.log
file. If you
do not want to overwrite it, it must be renamed before you perform the operation.
• Append All: appends all events to the raw data text file named
eventhistory.log
file.