Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 110 / 182

94 007-4382-002
3: Using TPM
The following selections appear on the 6.14 firmware dialog box that do not appear on
the 7.01 and later firmware dialog box:
• Stripe Size. In controllers with 7.01 and later firmware, the stripe size is selected
when the LUN is being defined (see Figure 3-13 on page 47). When controllers with
6.14 firmware are used, the stripe size must be defined using the
View/Modify
Controller dialog box before the LUN is defined.
• Disk Queue Limit (not viewable or changeable with controllers that have 7.01 and
later firmware).
The Auto Failback selection appears for 7.01 and later firmware only. It is not viewable
or changeable with controllers that have 6.14 firmware.
Make as many changes as you desire on the screen, then click the Apply button, which
saves the new configuration on all controllers, as well as the COD area on your RAID
subsystem’s disk drives. The
Reset Screen button changes the settings to the default
values (the ones appearing when the screen was first selected).