Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 169 / 182

Running the TPM 1.0 Version of TPMWatch From Windows
007-4382-002 153
Running the TPM 1.0 Version of TPMWatch From Windows
To run TPMWatch from Windows, you must be at the directory where the executable
resides. The syntax is:
tpmwatch [-P Freq][-d][-H HistFile][-T LogFile]-S StatusFile
-D DeviceFile[-E SMPT -M Addresses][-L]
Where:
-P Freq:
Frequency in seconds between each poll.
-d:
turns on status debugging features by sending information to
stderr.
-H HistoryFile:
Optional history file, which is appended to the last status
information record. Do not supply this parameter if you do not wish to create a history
file.
-T LogFile:
Sends error text to a user-specified file.
-S StatusFile: T
he health of the subsystem (see record layout in Table A-1).
-D DeviceFile:
Device to check (for example,
/hw/scsi/sc37d0l0
). This is the
raw or pass-through driver attached to any LUN on the subsystem. It doesn’t make any
difference which LUN you pick. Furthermore, the program still operates correctly if the
LUN that it is nailed to goes offline or is even removed.
-E SMPT:
Mail server address (name of mail server, for example, mail.xyz.com).
-M Addresses:
E-mail addresses used for sending alarm messages. For example:
“
<user_name@xyz>
” (quotes and angle brackets are required)
-L:
Send events to system log file.
To invoke TPMWATCH, bring up a DOS window, change directories to the location
where TPMWATCH is installed, and type the command to start TPMWATCH. An
example is:
tpmwatch -D /dev/h2i00l00 -P 10 -L