Silicon Graphics TP9100, Installation Instructions And User Manual

Page: 162 / 182

146 007-4382-002
3: Using TPM
Stop Configurator Service Routine on Host
In TPM 1.0, when the Stop Configurator Service Routine on Host menu selection is
made, the screen shown in Figure 3-112 appears.
Figure 3-112 TPM 1.0 Stop Service Screen
This screen provides an emergency shutdown routine for TPM 1.0. After you click
CLEAR , the TPM 1.0 service routine is immediately shut down. You are not prompted
with an “Are-You-Sure Message.” Once the service routine as been killed, no commands
can be issued, and anyone with a Web browser receives the standard error message
indicating the host is not found.
In TPM 1.2, when the Stop Configurator Service Routine on Host menu selection is
made, an emergency shutdown routine is initiated for TPM 1.2. You are not prompted
with an “Are-You-Sure” message. Once the TPM service routine has been killed, no
commands can be issued, and anyone with a Web browser receives the standard error
message indicating the host is not found. After TPM 1.2 is shut down, the message shown
in Figure 3-113 appears.
Figure 3-113 TPM 1.2 Shutdown Message