Silicon Graphics TP900, User Manual

Page: 44 / 72

28 007-4428-003
2: Setup and Operation
Engaging the Anti-tamper Locks
Each drive carrier handle has an anti-tamper lock, which is accessed through the small
cutout in the latch section of the handle. Drives are supplied with the locks set in the
unlocked position. A lock key is provided with the system.
Follow these steps to activate the locks:
1. Carefully insert the lock key into the lock in the handle. See Figure 2-5 for the
location of the anti-tamper lock.
2. Rotate the key in a clockwise direction until the indicator is visible in the aperture
beside the key.
Figure 2-5
Activating an Anti-tamper Lock
3. Remove the key.
Torx screwdriver