SIKA Dr.Siebert & Kühn GmbH & Co.KG
6.1.3 Description of the Block of 14 Keys and the Back Key
You can enter all the required temperature values and percentages via the block of 14 keys.
In Control and Calibration mode e.g., you can edit the setpoint value. In Select mode, several settings can be
edited on one screen page. For this purpose, select the desired value using the cursor keys. The line will then
be displayed in blue letters on a white field. Now enter the numeric values including sign and decimal places.
Always confirm by pressing the Enter key. Use the Clear key to delete an entry.
The Back key saves the selected and entered values and settings. The save process is briefly displayed in the
info line with "Speichern" (Saving) and takes you back one operational step.
6.1.4 Diagram of the Operating Structure
6.2 Starting the Calibrator
Preliminary Note
The setting range depends on the calibrator and specifies the range, in which the controller can be set. The
actual operating range may differ from the setting range, since the operating range can be restricted through a
switch-off value set in the
select system
submenu. The firmware version number may change after a
firmware update.
The individual serial number of the calibrators is specified in the
Info menu
and additionally on the type label
on the rear of the calibrator.