SIKA Dr.Siebert & Kühn GmbH & Co.KG
13 Technical Data
13.1 TP 38 165 / TP 38 165 E (-35 to 165 °C)
Block control unit
with PID controller
Setting of the block temperature
via the calibrator display through a self-explanatory menu
structure.
Setting range of the block temperature
between –30 °C and +165 °C
Behavior in the case of excess temperature
Automatic circuit breaker switches off the power supply to
cooling/heating elements in the case of illegal heating inside
the calibrator
Stability of the heating block controller
+/- 0.01K
Measuring inaccuracy
at 100 °C
0.1 K
Resolution 0.01
K
Accuracy of the heating block controller
+/-0.03 K
Gradients
axially above 4 cm at 160 °C
< 0.06 K
axially above 4 cm at -35 °C
< 0.04 K
Digital actual value display
monochrome display with graphics capabilities with a
resolution of 0.01 K
Display in the case of sensor breakage
1
Test bore in the block
Ø 28 mm
Immersion depth
150 mm
Adaptor inserts
with bores from 1.5 mm to 25 mm in increments of 0.5 mm
Power supply
100 ... 240 VAC, +10%/-15%, 50/60 Hz
Power consumption
400 W
Fuse
6.3 A, slow blowing (T6.3A250V)
Width 160
mm
Height 420
mm
Depth of the calibrator
320 mm
Footprint 512
cm²
Weight 10
kg
Ambient temperature
0...40 °C
Standard ambient conditions
Use permissible indoors only
Height up to 2000 m
Overvoltages Overvoltage
category
II
transient overvoltage as they normally occur in the supply
network
Degree of pollution
Degree of pollution 2
Storage temperature
-20...40 °C
Humidity
0...90 % relative humidity
Protection class
IP20
CE conformity
EN61326-1, EN61010-1
