SIKA TP 38 165, Operating Instructions Manual

Page: 24 / 43

6 Operation of the calibrator TP 38 … / TP 38 … E
Subject to technical changes 24 Ba_TP38-E_en 12/2014
SIKA Dr.Siebert & Kühn GmbH & Co.KG

Struthweg 7–9

D-34260 Kaufungen
 
+49 5605 803-0
 
+49 5605 803-54

info@sika.net

www.SIKA.net
6.5.2 Select TC menu
This menu item is displayed if an internal measuring instrument is available and switched on.
After selecting the "calibr TC" menu item in Select mode using the cursor key and confirming your selection
with the Select key, the "Select TC" submenu will be displayed.
The settings for a connected thermocouple are made in this menu. Make your selection using the cursor keys.
Activate your selection using the Select key.
If the check or calibration of a TC thermocouple is enabled with "ON", operation will be initiated in "calibr TC"
mode.
Fig. 11: Submenu „select TC“
Switching ON/OFF
In the second line you can switch the thermocouple check on or off. In the third line you can select the type of
probe.
Probe Types

TCK Thermocouple type K (NiCr-NiAl)

TCR Thermocouple type R (Pt13Rh – Pt)

TCL Thermocouple type L (Fe-CuNi)

TCE Thermocouple type E (NiCr-CuNi)

TCS Thermocouple type S (Pt10Rh-Pt)

TCN Thermocouple type N (NiCrSi – NiSiMg)

TCB Thermocouple type B (Pt30Rh-Pt6Rh)

TCJ Thermocouple type J (Fe-CuNi)

TCT Thermocouple type T (Cu-CuNi)

TCU Thermocouple type U (Cu-CuNi)
Connection
Below the "Connection” line you have to select, whether the probe is connected to a 4 mm terminals or a TC-
plug.